Reference Guide

Default Auto-negotiation is enabled. Adv. is 10h, 10f, 100h, 100f, 1000f.
Format speed all {100 | 10} {half-duplex | full-duplex}
Mode Global Config
show interface media-type
Use this command to display the media-type configuration of the interface.
Format show interface media-type
Mode Privileged EXEC
The following information is displayed for the command.
Column Meaning
Port Interface in unit/slot/port format.
Configured Media Type The media type for the interface.
•
auto-select: The media type is automatically selected. The preferred media type is
displayed.
•
RJ45
•
SFP
Active Displays the current operational state of the combo port.
The following command shows the command output:
(Extreme 220) (Routing) #show interface media-type
Port Configured Media Type Active
--------- --------------------------- ------
0/21 SFP RJ45
0/22 auto-select, SFP preferred Down
0/23 auto-select, SFP preferred RJ45
0/24 auto-select, SFP preferred Down
show port
This command displays port information.
Format
show port {intf-range | all}
Mode Privileged EXEC
Column Meaning
Interface unit/slot/port
Type If not blank, this field indicates that this port is a special type of port. The possible values are:
•
Mirror — this port is a monitoring port. For more information, see Port Mirroring Commands
on page 402.
•
PC Mbr— this port is a member of a port-channel (LAG).
•
Probe — this port is a probe port.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 282