Reference Guide

Default Disabled
Format no spanning-tree bpduguard
Mode Global Config
spanning-tree bpdumigrationcheck
Use this command to force a transmission of rapid spanning tree (RSTP) and MSTP (Multiple Spanning
Tree Protocol) BPDUs. Use the unit/slot/port parameter to transmit a BPDU from a specified interface,
or use the all keyword to transmit RST or MST BPDUs from all interfaces. This command forces the
BPDU transmission when you execute it, so the command does not change the system configuration or
have a no version.
Format spanning-tree bpdumigrationcheck {unit/slot/port | all}
Mode Global Config
spanning-tree configuration name
This command sets the Configuration Identifier Name for use in identifying the configuration that this
switch is currently using. The name is a string of up to 32 characters.
Default
base MAC address in hexadecimal notation
Format spanning-tree configuration name name
Mode Global Config
no spanning-tree configuration name
This command resets the Configuration Identifier Name to its default.
Format
no spanning-tree configuration name
Mode Global Config
spanning-tree configuration revision
This command sets the Configuration Identifier Revision Level for use in identifying the configuration
that this switch is currently using. The Configuration Identifier Revision Level is a number in the range of
0 to 65535.
Default
0
Format spanning-tree configuration revision 0-65535
Mode Global Config
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 289