Reference Guide

SW Switch Status Model ID Model ID Status Version
--- ---------- --------- ------------- ------------- ------------- -----------
1 Mgmt Sw 220-24t-10GE2 220-24t-10GE2 OK 1.1.1.10
2 Stack Mbr Oper Stby 220-48t-10GE4 220-48t-10GE4 OK 1.1.1.10
When you specify a value for unit, the following information displays.
Column Meaning
Management Status Whether the switch is the Primary Management Unit, a stack member, or the status is
unassigned.
Hardware Management
Preference
The hardware management preference of the switch. The hardware management
preference can be disabled or unassigned.
Admin Management
Preference
The administrative management preference value assigned to the switch. This
preference value indicates how likely the switch is to be chosen as the Primary
Management Unit.
Switch Type The 32-bit numeric switch type.
Model Identifier The model identifier for this switch. Model Identifier is a 32-character field assigned
by the device manufacturer to identify the device.
Switch Status The switch status. Possible values are OK, Unsupported, Code Mismatch, Config
Mismatch, SDM Mismatch, STM Mismatch, or Not Present.
Switch Description The switch description.
Expected Code Type The expected code type.
Expected Code Version The expected code version.
Detected Code Version The version of code running on this switch. If the switch is not present and the data is
from preconfiguration, then the code version is “None”.
Detected Code in Flash The version of code that is currently stored in FLASH memory on the switch. This
code executes after the switch is rebooted. If the switch is not present and the data is
from preconfiguration, then the code version is “None”.
SFS Last Attempt Status The stack firmware synchronization status in the last attempt for the specified unit.
Serial Number The serial number for the specified unit.
Up Time The system up time.
The following example shows CLI display output for the command.
(Extreme 220) (Config) #show switch 2
Switch............................ 2
Management Status................. Stack Member
Hardware Management Preference.... Unassigned
Admin Management Preference....... Unassigned
Switch Type....................... 0xb1500005
Preconfigured Model Identifier.... 220-48t-10GE4
Plugged-in Model Identifier....... 220-48t-10GE4
Switch Status..................... OK
Switch Description................ Extreme 220-Series 48GE, 4 10GbE SFP+ ports,
1 Fixed AC PSU, 1 RPS port, L3 Switching
Detected Code in Flash............ 1.1.1.10
SFS Last Attempt Status........... None
Serial Number..................... 1648G-01431
Up Time........................... 1 days 19 hrs 44 mins 26 secs
Stacking Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 29