Reference Guide

show supported switchtype
This command displays information about all supported switch types or a specific switch type.
Format show supported switchtype [switchindex]
Mode User EXEC
Privileged EXEC
If you do not supply a value for switchindex, the following output appears:
Column Meaning
Switch Index (SID) The index into the database of supported switch types. This index is used when
preconfiguring a member to be added to the stack.
Model Identifier The model identifier for the supported switch type.
Management Preference The management preference value of the switch type.
Code Version The code load target identifier of the switch type.
If you supply a value for switchindex, the following output appears:
Column Meaning
Switch Type The 32-bit numeric switch type for the supported switch.
Model Identifier The model identifier for the supported switch type.
Switch Description The description for the supported switch type.
Stack Port Commands
This section describes the commands used to view and configure stack port information.
stack-port
This command sets stacking per port or range of ports to either stack or ethernet mode.
Default
stack
Format stack-port unit/slot/port [{ethernet | stack}]
Mode Stack Global Config
show stack-port
This command displays summary stack-port information for all interfaces.
Format
show stack-port
Mode Privileged EXEC
For Each Interface:
Stacking Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 30