Reference Guide

Default 5
Format keepalive val [retry]
Mode Global Configuration
Parameter Description
val
The time in seconds between transmission of keep-alive packets.
retry
Configures the count of keepalive packets received by the switch
after which the switch will be error disabled.
show keepalive
This command displays the global keepalive configuration.
Default None
Format show keepalive
Mode Privileged EXEC
(Extreme 220) (Routing) #show keepalive
Keepalive : Enabled
Transmit interval : 5 seconds
Retry count : 1
show keepalive statistics
This command displays the keepalive statistics for each port or a specific port.
Default
None
Format show keepalive statistics {port-num | all }
Mode Privileged EXEC
Parameter Definition
port-num
The port number for which to show statistics.
all Show statistics for all ports.
(Extreme 220) (Routing) #show keepalive statistics all
Keep Loop Loop Time Since Rx Port
Port Alive Detected Count Last Loop Action Status
------ --------- ----------- -------- ------------- ------------- --------
0/1 Yes Yes 1 85 shut-down D-Disable
0/3 Yes No log-shutdown Enable
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 316