Reference Guide

no vlan
This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is reserved
for the default VLAN). The VLAN range is 2-4093.
Format no vlan 2-4093
Mode VLAN Config
vlan acceptframe
This command sets the frame acceptance mode on an interface or range of interfaces. For VLAN Only
mode, untagged frames or priority frames received on this interface are discarded. For Admit All mode,
untagged frames or priority frames received on this interface are accepted and assigned the value of
the interface VLAN ID for this port. For admituntaggedonly mode, only untagged frames are accepted
on this interface; tagged frames are discarded. With any option, VLAN tagged frames are forwarded in
accordance with the IEEE 802.1Q VLAN Specification.
Default all
Format vlan acceptframe {admituntaggedonly | vlanonly | all}
Mode Interface Config
no vlan acceptframe
This command resets the frame acceptance mode for the interface or range of interfaces to the default
value.
Format
no vlan acceptframe
Mode Interface Config
vlan ingressfilter
This command enables ingress filtering on an interface or range of interfaces.
If ingress filtering is enabled, frames received with VLAN IDs that do not match the VLAN membership
of the receiving interface are discarded.
If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership
of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
Default
Disabled
Format vlan ingressfilter
Mode Interface Config
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 318