Reference Guide

no vlan ingressfilter
This command disables ingress filtering.
If ingress filtering is disabled, frames received with VLAN IDs that do not match the VLAN membership
of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
If ingress filtering is enabled, frames received with VLAN IDs that do not match the VLAN membership
of the receiving interface are discarded
Format no vlan ingressfilter
Mode Interface Config
vlan internal allocation
Use this command to configure which VLAN IDs to use for port-based routing interfaces. When a port-
based routing interface is created, an unused VLAN ID is assigned internally.
Format vlan internal allocation {base vlan-id | policy ascending |
policy descending}
Mode Global Config
Parameter Description
vlan-id
The first VLAN ID to be assigned to a port-based routing interface.
policy ascending VLAN IDs assigned to port-based routing interfaces start at the base and
increase in value
policy descending VLAN IDs assigned to port-based routing interfaces start at the base and
decrease in value
vlan makestatic
This command changes a dynamically created VLAN (created by GVRP registration) to a static VLAN
(one that is permanently configured and defined). The ID is a valid VLAN identification number. VLAN
range is 2-4093.
Format
vlan makestatic 2-4093
Mode VLAN Config
vlan name
This command changes the name of a VLAN. The name is an alphanumeric string of up to 32
characters, and the ID is a valid VLAN identification number. ID range is 1-4093.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 319