Reference Guide

no protocol vlan group
This command removes the interface from this protocol-based VLAN group that is identified by this
groupid.
Format no protocol vlan group groupid
Mode Interface Config
protocol vlan group all
This command adds all physical interfaces to the protocol-based VLAN identified by groupid. You can
associate multiple interfaces with a group, but you can only associate each interface and protocol
combination with one group. If adding an interface to a group causes any conflicts with protocols
currently associated with the group, this command will fail and the interface(s) will not be added to the
group.
Default None
Format protocol vlan group all groupid
Mode Global Config
no protocol vlan group all
This command removes all interfaces from this protocol-based VLAN group that is identified by this
groupid.
Format
no protocol vlan group all groupid
Mode Global Config
show port protocol
This command displays the Protocol-Based VLAN information for either the entire system, or for the
indicated group.
Format
show port protocol {groupid | all}
Mode Privileged EXEC
Column Meaning
Group Name The group name of an entry in the Protocol-based VLAN table.
Group ID The group identifier of the protocol group.
VLAN The VLAN associated with this Protocol Group.
Protocol(s) The type of protocol(s) for this group.
Interface(s) Lists the unit/slot/port interface(s) that are associated with this Protocol Group.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 325