Reference Guide

switchport private-vlan
This command defines a private-VLAN association for an isolated or community port or a mapping for a
promiscuous port.
Format switchport private-vlan {host-association primary-vlan-id
secondary-vlan-id | mapping primary-vlan-id {add | remove}
secondary-vlan-list}
Mode Interface Config
Parameter Description
host-
association
Defines the VLAN association for community or host ports.
mapping Defines the private VLAN mapping for promiscuous ports.
primary-vlan-
id
Primary VLAN ID of a private VLAN.
secondary-
vlan-id
Secondary (isolated or community) VLAN ID of a private VLAN.
add Associates the secondary VLAN with the primary one.
remove Deletes the secondary VLANs from the primary VLAN association.
secondary-
vlan-list
A list of secondary VLANs to be mapped to a primary VLAN.
no switchport private-vlan
This command removes the private-VLAN association or mapping from the port.
Format
no switchport private-vlan {host-association| mapping}
Mode Interface Config
switchport mode private-vlan
This command configures a port as a promiscuous or host private VLAN port. Note that the properties
of each mode can be configured even when the switch is not in that mode. However, they will only be
applicable once the switch is in that particular mode.
Default
general
Format switchport mode private-vlan {host| promiscuous}
Mode Interface Config
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 331