Reference Guide

Default trust
Format voice vlan data priority {untrust | trust}
Mode Interface Config
show voice vlan
Format show voice vlan [interface {unit/slot/port | all}]
Mode Privileged EXEC
When the interface parameter is not specified, only the global mode of the Voice VLAN is displayed.
Column Meaning
Administrative Mode The Global Voice VLAN mode.
When the interface is specified:
Column Meaning
Voice VLAN Mode The admin mode of the Voice VLAN on the interface.
Voice VLAN ID The Voice VLAN ID
Voice VLAN Priority The do1p priority for the Voice VLAN on the port.
Voice VLAN Untagged The tagging option for the Voice VLAN trac.
Voice VLAN CoS Override The Override option for the voice trac arriving on the port.
Voice VLAN Status The operational status of Voice VLAN on the port.
Provisioning (IEEE 802.1p) Commands
This section describes the commands used to configure provisioning (IEEE 802.1p,) which allows you to
prioritize ports.
vlan port priority all
This command configures the port priority assigned for untagged packets for all ports presently
plugged into the device. The range for the priority is 0-7. Any subsequent per port configuration will
override this configuration setting.
Format
vlan port priority all priority
Mode Global Config
vlan priority
This command configures the default 802.1p port priority assigned for untagged packets for a specific
interface. The range for the priority is 0–7.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 338