Reference Guide

Default Unprotected
Format switchport protected groupid
Mode Interface Config
no switchport protected (Interface Config)
Use this command to configure a port as unprotected. The groupid parameter identifies the set of
protected ports to which this interface is assigned.
Format no switchport protected groupid
Mode Interface Config
show switchport protected
This command displays the status of all the interfaces, including protected and unprotected interfaces.
Format show switchport protected groupid
Mode
•
Privileged EXEC
•
User EXEC
Column Meaning
Group ID The number that identifies the protected port group.
Name An optional name of the protected port group. The name can be up to 32 alphanumeric
characters long, including blanks. The default is blank.
List of Physical Ports List of ports, which are configured as protected for the group identified with groupid. If no
port is configured as protected for this group, this field is blank.
show interfaces switchport
This command displays the status of the interface (protected/unprotected) under the groupid.
Format
show interfaces switchport unit/slot/port groupid
Mode
•
Privileged EXEC
•
User EXEC
Column Meaning
Name A string associated with this group as a convenience. It can be up to 32 alphanumeric characters long,
including blanks. The default is blank. This field is optional.
Protected Whether the interface is protected or not. It shows TRUE or FALSE. If the group is a multiple groups
then it shows TRUE in Group groupid.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 342