Reference Guide

no set garp timer leave
This command sets the GVRP leave time on all ports or a single port to the default and only has an
eect when GVRP is enabled.
Format no set garp timer leave
Mode
•
Interface Config
•
Global Config
set garp timer leaveall
This command sets how frequently Leave All PDUs are generated. A Leave All PDU indicates that all
registrations will be unregistered. Participants would need to rejoin in order to maintain registration. The
value applies per port and per GARP participation. The time may range from 200 to 6000
(centiseconds). The value 1000 centiseconds is 10 seconds. You can use this command on all ports
(Global Config mode), or on a single port or a range of ports (Interface Config mode) and it only has an
eect only when GVRP is enabled. The leave all time must be greater than the leave time.
Default 1000
Format set garp timer leaveall 200-6000
Mode
•
Interface Config
•
Global Config
no set garp timer leaveall
This command sets how frequently Leave All PDUs are generated the default and only has an eect
when GVRP is enabled.
Format
no set garp timer leaveall
Mode
•
Interface Config
•
Global Config
show garp
This command displays GARP information.
Format
show garp
Mode
•
Privileged EXEC
•
User EXEC
Column Meaning
GMRP Admin Mode The administrative mode of GARP Multicast Registration Protocol (GMRP) for the system.
GVRP Admin Mode The administrative mode of GARP VLAN Registration Protocol (GVRP) for the system.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 344