Reference Guide

Default Disabled
Format set gmrp adminmode
Mode Privileged EXEC
no set gmrp adminmode
This command disables GARP Multicast Registration Protocol (GMRP) on the system.
Format no set gmrp adminmode
Mode Privileged EXEC
set gmrp interfacemode
This command enables GARP Multicast Registration Protocol on a single interface (Interface Config
mode), a range of interfaces, or all interfaces (Global Config mode). If an interface which has GARP
enabled is enabled for routing or is enlisted as a member of a port-channel (LAG), GARP functionality is
disabled on that interface. GARP functionality is subsequently re-enabled if routing is disabled and
port-channel (LAG) membership is removed from an interface that has GARP enabled.
Default
Disabled
Format set gmrp interfacemode
Mode
•
Interface Config
•
Global Config
no set gmrp interfacemode
This command disables GARP Multicast Registration Protocol on a single interface or all interfaces. If an
interface which has GARP enabled is enabled for routing or is enlisted as a member of a port-channel
(LAG), GARP functionality is disabled. GARP functionality is subsequently re-enabled if routing is
disabled and port-channel (LAG) membership is removed from an interface that has GARP enabled.
Format
no set gmrp interfacemode
Mode
•
Interface Config
•
Global Config
show gmrp configuration
This command displays Generic Attributes Registration Protocol (GARP) information for one or all
interfaces.
Format
show gmrp configuration {unit/slot/port | all}
Mode
•
Privileged EXEC
•
User EXEC
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 347