Reference Guide

previously authenticated client is reauthenticated with a higher-priority method when the same is
received.
Note
Captive portal is always the last method in the list. It is not supported in this version of the
product.
Default authentication order dot1x mab captive portal
Format authentication priority {dot1x [mab [captive portal] |
captive portal] | mab [dot1x [captive portal]| captive
portal] | captive portal}
Mode Interface Config
no authentication priority
This command returns the port to the default order of priority for the authentication methods.
Format no authentication priority
Mode Interface Config
authentication timer restart
This command sets the time, in seconds, after which reauthentication starts. (The default time is 300
seconds.) The timer restarts the authentication only after all the authentication methods fail. At the
expiration of this timer, authentication is reinitiated for the port.
Format
authentication timer restart 300-65535
Mode Interface Config
no authentication timer restart
This command sets the reauthentication value to the default value of 3600 seconds.
Format
no authentication timer restart
Mode Interface Config
show authentication authentication-history
Use this command to display information about the authentication history for a specified interface.
Format
show authentication authentication-history unit/slot/port
Mode Privileged EXEC
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 354