Reference Guide

Term Definition
Method 3
The third method in the specified authentication login list, if any.
The following example displays the authentication configuration.
(Extreme 220) #show authentication methods
Login Authentication Method Lists
---------------------------------
defaultList : local
networkList : local
Enable Authentication Method Lists
----------------------------------
enableList : enable none
enableNetList : enable deny
Line Login Method List Enable Method List
------- ----------------- ------------------
Console defaultList enableList
Telnet networkList enableNetList
SSH networkList enableNetList
HTTPS :local
HTTP :local
DOT1X :
show authentication statistics
Use this command to display the authentication statistics for an interface.
Format
show authentication statistics unit/slot/port
Mode Privileged EXEC
The following information is displayed for each interface.
Term
Definition
Port
The port for which information is being displayed.
802.1X attempts
The number of Dot1x authentication attempts for the port.
802.1X failed attempts
The number of failed Dot1x authentication attempts for the port.
Mab attempts
The number of MAB (MAC authentication bypass) authentication attempts for
the port.
Mab failed attempts
The number of failed MAB authentication attempts for the port.
Captive-portal attempts
The number of captive portal (web authorization) authentication attempts for
the port.
Note
Captive portal is not supported in this version of the product.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 357