Reference Guide

Term Definition
Captive-portal failed
attempts
The number of failed captive portal authentication attempts for the port.
Note
Captive portal is not supported in this version of the product.
(Extreme 220) (Routing) #show authentication statistics 1/0/1
Port........................................... 1/0/1
802.1X attempts................................ 0
802.1X failed attempts......................... 0
Mab attempts................................... 0
Mab failed attempts............................ 0
Captive-portal attempts........................ 0
Captive-Portal failed attempts................. 0
clear authentication statistics
Use this command to clear the authentication statistics on an interface.
Format clear authentication authentication-history {unit/slot/port]
| all}
Mode Privileged EXEC
clear authentication authentication-history
Use this command to clear the authentication history log for an interface.
Format
clear authentication authentication-history {unit/slot/port |
all}
Mode Privileged EXEC
show dot1x
This command is used to show a summary of the global dot1x configuration, summary information of
the dot1x configuration for a specified port or all ports, the detailed dot1x configuration for a specified
port and the dot1x statistics for a specified port – depending on the tokens used.
Format
show dot1x [{summary {unit/slot/port | all} | detail unit/
slot/port | statistics unit/slot/port]
Mode Privileged EXEC
If you do not use the optional parameters unit/slot/port or vlanid, the command displays the global
dot1x mode, the VLAN Assignment mode, and the Dynamic VLAN Creation mode.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 358