Reference Guide

Term Definition
then a reauthentication of the client authenticated on the port is performed. This value is
valid for the port only when the port control mode is not MAC-based.
The following example shows CLI display output for the command.
(Extreme 220) #show dot1x detail 1/0/3
Port........................................... 1/0/1
Protocol Version............................... 1
PAE Capabilities............................... Authenticator
Control Mode................................... auto
Authenticator PAE State........................ Initialize
Backend Authentication State................... Initialize
Quiet Period (secs)............................ 60
Transmit Period (secs)......................... 30
Guest VLAN ID.................................. 0
Guest VLAN Period (secs)....................... 90
Supplicant Timeout (secs)...................... 30
Server Timeout (secs).......................... 30
Maximum Requests............................... 2
Configured MAB Mode............................ Enabled
Operational MAB Mode........................... Disabled
VLAN Id........................................ 0
VLAN Assigned Reason........................... Not Assigned
Reauthentication Period (secs)................. 3600
Reauthentication Enabled....................... FALSE
Key Transmission Enabled....................... FALSE
EAPOL flood Mode Enabled....................... FALSE
Control Direction.............................. both
Maximum Users.................................. 16
Unauthenticated VLAN ID........................ 0
Session Timeout................................ 0
Session Termination Action..................... Default
For each client authenticated on the port, the show dot1x detail unit/slot/port command will display the
following MAC-based dot1x parameters if the port-control mode for that specific port is MAC-based.
Term
Definition
Supplicant MAC-Address The MAC-address of the supplicant.
Authenticator PAE State Current state of the authenticator PAE state machine. Possible values are Initialize,
Disconnected, Connecting, Authenticating, Authenticated, Aborting, Held,
ForceAuthorized, and ForceUnauthorized.
Backend Authentication State Current state of the backend authentication state machine. Possible values are
Request, Response, Success, Fail, Timeout, Idle, and Initialize.
VLAN-Assigned The VLAN assigned to the client by the RADIUS server.
Logical Port The logical port number associated with the client.
If you use the optional parameter statistics unit/slot/port, the following dot1x statistics for the specified
port appear.
Term
Definition
Port The interface whose statistics are displayed.
EAPOL Frames Received The number of valid EAPOL frames of any type that have been received by this
authenticator.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 361