Reference Guide

show dot1x clients
This command displays 802.1X client information. This command also displays information about the
number of clients that are authenticated using Monitor mode and using 802.1X.
Format show dot1x clients {unit/slot/port | all}
Mode Privileged EXEC
Term Definition
Clients Authenticated
using Monitor Mode
The number of the Dot1x clients authenticated using Monitor mode.
Clients Authenticated
using Dot1x
The number of Dot1x clients authenticated using 802.1x authentication process.
Logical Interface
The logical port number associated with a client.
Interface
The physical port to which the supplicant is associated.
User Name
The user name used by the client to authenticate to the server.
Supplicant MAC
Address
The supplicant device MAC address.
Session Time
The time since the supplicant is logged on.
Filter ID
Identifies the Filter ID returned by the RADIUS server when the client was
authenticated. This is a configured DiServ policy name on the switch.
VLAN ID
The VLAN assigned to the port.
VLAN Assigned
The reason the VLAN identified in the VLAN ID field has been assigned to the
port. Possible values are RADIUS, Unauthenticated VLAN, Monitor Mode, or
Default. When the VLAN Assigned reason is Default, it means that the VLAN
was assigned to the port because the P-VID of the port was that VLAN ID.
Session Timeout
This value indicates the time for which the given session is valid. The time
period in seconds is returned by the RADIUS server on authentication of the
port. This value is valid for the port only when the port-control mode is not
MAC-based.
Session Termination
Action
This value indicates the action to be taken once the session timeout expires.
Possible values are Default and Radius-Request. If the value is Default, the
session is terminated and client details are cleared. If the value is Radius-
Request, then a reauthentication of the client is performed.
show dot1x users
This command displays 802.1X port security user information for locally configured users.
Format
show dot1x users unit/slot/port
Mode Privileged EXEC
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 363