Reference Guide

Default auto
Format no dot1x supplicant port-control
Mode Interface Config
dot1x supplicant max-start
This command configures the number of attempts that the supplicant makes to find the authenticator
before the supplicant assumes that there is no authenticator.
Default 3
Format dot1x supplicant max-start 1-10
Mode Interface Config
no dot1x supplicant max-start
This command sets the max-start value to the default.
Format no dot1x supplicant max-start
Mode Interface Config
dot1x supplicant timeout start-period
This command configures the start period timer interval, in seconds, to wait for the EAP identity request
from the authenticator.
Default
30 seconds
Format dot1x supplicant timeout start-period 1-65535
Mode Interface Config
no dot1x supplicant timeout start-period
This command sets the start-period value to the default.
Format
no dot1x supplicant timeout start-period
Mode Interface Config
dot1x supplicant timeout held-period
This command configures the held period timer interval, in seconds, to wait for the next authentication
on previous authentication fail.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 365