Reference Guide

Column Meaning
EAPOL Frames Received Displays the number of valid EAPOL frames received on the port.
EAPOL Frames Transmitted Displays the number of EAPOL frames transmitted via the port.
EAPOL Start Frames Transmitted Displays the number of EAPOL Start frames transmitted via the port.
EAPOL Logo Frames Received Displays the number of EAPOL Log o frames that have been received on the
port.
EAP Resp/ID Frames Received Displays the number of EAP Respond ID frames that have been received on
the port.
EAP Response Frames Received Displays the number of valid EAP Respond frames received on the port.
EAP Req/ID Frames Transmitted Displays the number of EAP Requested ID frames transmitted via the port.
EAP Req Frames Transmitted Displays the number of EAP Request frames transmitted via the port.
Invalid EAPOL Frames Received Displays the number of unrecognized EAPOL frames received on this port.
EAP Length Error Frames
Received
Displays the number of EAPOL frames with an invalid Packet Body Length
received on this port.
Last EAPOL Frames Version Displays the protocol version number attached to the most recently received
EAPOL frame.
Last EAPOL Frames Source Displays the source MAC Address attached to the most recently received
EAPOL frame.
The following example shows CLI display output for the command.
(Extreme 220) #show dot1x statistics 0/1
Port........................................... 0/1
EAPOL Frames Received.......................... 0
EAPOL Frames Transmitted....................... 0
EAPOL Start Frames Transmitted................. 3
EAPOL Logoff Frames Received................... 0
EAP Resp/Id frames transmitted................. 0
EAP Response frames transmitted................ 0
EAP Req/Id frames transmitted.................. 0
EAP Req frames transmitted..................... 0
Invalid EAPOL frames received.................. 0
EAP length error frames received............... 0
Last EAPOL Frame Version....................... 0
Last EAPOL Frame Source........................ 00:00:00:00:02:01
Task-based Authorization
Task-based authorization allows users to have dierent permission levels (read, write, execute, debug)
at a per-component level. Task-based authorization uses the concept of components/tasks to define
permission for commands for a given user.
Users are assigned to User Groups that are, in turn, associated with Task Groups. Each Task Group is
then associated with one or more tasks/components. This release supports the AAA, BGP (Border
Gateway Protocol) and OSPF (Open Shortest Path First) components. Also, this feature is supported
only for users who are authenticated locally via the CLI interface.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 367