Reference Guide

3 Management Commands
Network Interface Commands
Console Port Access Commands
Telnet Commands
Secure Shell Commands
Management Security Commands
Hypertext Transfer Protocol Commands
Access Commands
User Account Commands
SNMP Commands
RADIUS Commands
TACACS+ Commands
Configuration Scripting Commands
Prelogin Banner, System Prompt, and Host Name Commands
This chapter describes the management commands available in the 200 Series CLI.
Caution
The commands in this chapter are in one of three functional groups:
•
Show commands display switch settings, statistics, and other information.
•
Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration setting.
•
Clear commands clear some or all of the settings to factory defaults.
Network Interface Commands
This section describes the commands used to configure a logical interface for management access. To
configure the management VLAN, see network mgmt_vlan on page 317.
enable (Privileged EXEC access)
This command gives you access to the Privileged EXEC mode. From the Privileged EXEC mode, you can
configure the network interface.
Format
enable
Mode User EXEC
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 37