Reference Guide

Default None
Format storm-control multicast action {shutdown | trap}
Mode
•
Global Config
•
Interface Config
no storm-control multicast action
This command returns the multicast storm recovery action option to the default value for all interfaces
(Global Config mode) or one or more interfaces (Interface Config mode).
Format no storm-control multicast action
Mode
•
Global Config
•
Interface Config
storm-control multicast level
This command configures the multicast storm recovery threshold for all interfaces (Global Config mode)
or one or more interfaces (Interface Config mode) as a percentage of link speed and enables multicast
storm recovery mode. If the mode is enabled, multicast storm recovery is active, and if the rate of L2
multicast trac ingressing on an interface increases beyond the configured threshold, the trac will be
dropped. Therefore, the rate of multicast trac will be limited to the configured threshold.
Default
5
Format storm-control multicast level 0-100
Mode
•
Global Config
•
Interface Config
no storm-control multicast level
This command sets the multicast storm recovery threshold to the default value for all interfaces (Global
Config mode) or one or more interfaces (Interface Config mode) and disables multicast storm recovery.
Format
no storm-control multicast level 0-100
Mode
•
Global Config
•
Interface Config
storm-control multicast rate
Use this command to configure the multicast storm recovery threshold for all interfaces (Global Config
mode) or one or more interfaces (Interface Config mode) in packets per second. If the mode is enabled,
multicast storm recovery is active, and if the rate of L2 broadcast trac ingressing on an interface
increases beyond the configured threshold, the trac is dropped. Therefore, the rate of multicast trac
is limited to the configured threshold.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 376