Reference Guide

Format no port lacptimeout {actor | partner}
Mode Global Config
Note
Both the no portlacptimeout and the no lacp actor admin state commands set the
values back to default, regardless of the command used to configure the ports. Consequently,
both commands will display in show running-config.
port-channel adminmode
This command enables all configured port-channels with the same administrative mode setting.
Format port-channel adminmode all
Mode Global Config
no port-channel adminmode
This command disables all configured port-channels with the same administrative mode setting.
Format no port-channel adminmode all
Mode Global Config
port-channel linktrap
This command enables link trap notifications for the port-channel (LAG
). The interface is a logical unit/
slot/port for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting. Instead of unit/slot/port, lag lag-intf-num can be used as an alternate way
to specify the LAG interface. lag lag-intf-num can also be used to specify the LAG interface where lag-
intf-num is the LAG port number.
Default
Enabled
Format port-channel linktrap {logical unit/slot/port | all}
Mode Global Config
no port-channel linktrap
This command disables link trap notifications for the port-channel (LAG). The interface is a logical slot
and port for a configured port-channel. The option all sets every configured port-channel with the same
administrative mode setting.
Format
no port-channel linktrap {logical unit/slot/port | all}
Mode Global Config
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 394