Reference Guide

Format show hashdest {lag lag-id | ecmp prefix/prefix-length}
in_port unit/slot/port src-mac macaddr dst-mac macaddr [vlan
vlan-id] ethertype 0xXXXX [src-ip {ipv4-addr | ipv6-addr}
dst-ip {ipv4-addr | ipv6-addr} protocol pid src-l4-port port-
num dst-l4-port port-num]
Mode Privileged EXEC
Parameter Definition
lag The LAG group for which to display the egress physical port.
ecmp The IP address of the EMC_ group for which to display the egress physical port.
in_port The incoming physical port for the system.
src-mac The source MAC address.
dst-mac The destination MAC address.
vlan The VLAN ID for VLAN-tagged packets. Do not use this parameter or enter 0 for non-
VLAN-tagged packets.
ethertype The 16-bit EtherType value, in the form 0xXXXX. For layer 3 packets, hash prediction is only
available for IPv4 (0x0800) and IPv6 (0x86DD).
src-ip The source IP address, entered as x.x.x.x for IPv4 or x:x:x:x:x:x:x:x for IPv6
packets.
dst-ip The destination IP address, entered as x.x.x.x for IPv4 or x:x:x:x:x:x:x:x for IPv6
packets.
protocol The protocol ID.
src-l4-port The layer 4 source port.
dst-l4-port The layer 4 destination port.
Layer 2 VLAN tagged packet forwarded to a LAG
(Extreme 220) (Routing) #show hashdest lag 1 in_port 0/3 src-mac 00:00:20:21:AE:8A dst-mac
00:10:18:99:F7:4E vlan 10 ethertype 0x8870
LAG Destination Port
----------- ----------------
1 0/29
Layer 2 non-VLAN tagged packet forwarded to a LAG
(Extreme 220) (Routing) #show hashdest lag 1 in_port 0/3 src-mac 00:00:20:21:AE:8A dst-mac
00:10:18:99:F7:4E ethertype 0x8870
LAG Destination Port
----------- ----------------
1 0/31
Non-VLAN tagged IPv4 UDP packet forwarded to a LAG
(Extreme 220) (Routing) #show hashdest lag 1 in_port 0/3 src-mac 00:00:20:21:AE:8A dst-mac
00:10:18:99:F7:4E ethertype 0x0800 src-ip 7.0.0.2 dst-ip 3.0.0.2 protocol 17 src-l4-port
63 dst-l4-port 64
LAG Destination Port
----------- ----------------
1 0/32
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 397