Reference Guide

VLAN tagged IPv4 TCP packet forwarded to a LAG
(Extreme 220) (Routing) #show hashdest lag 1 in_port 0/3 src-mac 00:00:20:21:AE:8A dst-mac
00:10:18:99:F7:4E vlan 10 ethertype 0x0800 src-ip 7.0.0.2 dst-ip 3.0.0.2 protocol 6 src-l4-
port 67 dst-l4-port 68
LAG Destination Port
----------- ----------------
1 0/31
Non-VLAN tagged IPv4 UDP packet forwarded to an ECMP group
(Extreme 220) (Routing) #show hashdest ecmp 10.0.0.2/16 in_port 0/3 src-mac
00:00:20:21:AE:8A dst-mac 00:10:18:99:F7:4E vlan 0 ethertype 0x0800 src-ip 7.0.0.2 dst-ip
3.0.0.2 protocol 17 src-l4-port 63 dst-l4-port 64
Egress Port
----------------------------
30.0.0.2 on interface 0/31
VLAN tagged IPv4 TCP packet forwarded to an ECMP group
(Extreme 220) (Routing) #show hashdest ecmp 10.0.0.2/16 in_port 0/3 src-mac 00:00:20:21:AE:
8A dst-mac 00:10:18:99:F7:4E vlan 10 ethertype 0x0800 src-ip 7.0.0.2 dst-ip 3.0.0.2
protocol 6 src-l4-port 67 dst-l4-port 68
Egress Port
-----------
0/29
Non-VLAN tagged IPv6 UDP packet forwarded to an ECMP group
(Extreme 220) (Routing) #show hashdest ecmp 4001::200/64 in_port 0/3 src-mac
00:00:20:21:AE:8A dst-mac 00:10:18:99:F7:4E ethertype 0x86dd src-ip 7001:0:0:0:0:0:0:2 dst-
ip 3001:0:0:0:0:0:0:2 protocol 17 src-l4-port 63 dst-l4-port 64
Egress Port
----------------------------
6001::200 on interface 0/31
Non-VLAN tagged IPv6 TCP packet forwarded to an ECMP group
(Extreme 220) (Routing) #show hashdest ecmp 6001::200/64 in_port 0/3 src-mac
00:00:20:21:AE:8A dst-mac 00:10:18:99:F7:4E ethertype 0x86dd src-ip 7001:0:0:0:0:0:0:2 dst-
ip 3001:0:0:0:0:0:0:2 protocol 6 src-l4-port 67 dst-l4-port 68
Egress Port
----------------------------
8001::200 on interface 0/32
show lacp actor
Use this command to display LACP actor attributes. Instead of unit/slot/port, lag lag-intf-num can be
used as an alternate way to specify the LAG interface. lag lag-intf-num can also be used to specify the
LAG interface where lag-intf-num is the LAG port number.
Format
show lacp actor {unit/slot/port|all}
Mode Global Config
The following output parameters are displayed.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 398