Reference Guide

partner/long
1/0/2 actor/long Auto True
partner/long
1/0/3 actor/long Auto False
partner/long
1/0/4 actor/long Auto False
partner/long
show port-channel system priority
Use this command to display the port-channel system priority.
Format show port-channel system priority
Mode Privileged EXEC
show port-channel counters
Use this command to display port-channel counters for the specified port.
Format show port-channel unit/slot/port counters
Mode Privileged EXEC
Column Meaning
Local Interface The valid slot/port number.
Channel Name The name of this port-channel (LAG).
Link State Whether the Link is up or down.
Admin Mode May be enabled or disabled. The factory default is enabled.
Port Channel Flap Count The number of times the port-channel was inactive.
Mbr Ports The slot/port for the port member.
Mbr Flap Counters The number of times a port member is inactive, either because the link is down, or the
admin state is disabled.
The following example shows CLI display output for the command.
(Extreme 220) #show port-channel 3/1 counters
Local Interface................................ 3/1
Channel Name................................... ch1
Link State..................................... Down
Admin Mode..................................... Enabled
Port Channel Flap Count........................ 0
Mbr Mbr Flap
Ports Counters
------ ---------
0/1 0
0/2 0
0/3 1
0/4 0
0/5 0
0/6 0
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 401