Reference Guide

Term Definition
Probe Port
Probe port (destination port) for the session identified with session-id. If probe port
is not set then this field is blank.
Src VLAN
All member ports of this VLAN are mirrored. If the source VLAN is not configured, this
field is blank.
Mirrored Port
The port that is configured as a mirrored port (source port) for the session identified with
session-id. If no source port is configured for the session, this field is blank.
Ref. Port
This port carries all the mirrored trac at the source switch.
Src RVLAN
The source VLAN is configured at the destination switch. If the remote VLAN is not
configured, this field is blank.
Dst RVLAN
The destination VLAN is configured at the source switch. If the remote VLAN is not
configured, this field is blank.
Type
Direction in which source port configured for port mirroring. Types are tx for transmitted
packets and rx for receiving packets.
IP ACL
The IP access-list id or name attached to the port mirroring session.
MAC ACL
The MAC access-list name attached to the port mirroring session.
Example 1:
(Extreme 220) #show monitor session 1
Session
ID
Admin
Mode
Probe
Port
Src
VLAN
Mirrore
d Port
Ref
Port
Src
RVLAN
Dst
RVLAN
Type IP ACL MAC ACL
1 Enable 1/0/8 1/0/10 Rx,Tx
Session ID Admin Mode Probe Port Mirrored Port Type
1 Enable 1/0/8 1/0/10 Rx,Tx
Example 2:
(Extreme 220) #show monitor session all
Session
ID
Admin
Mode
Probe
Port
Src
VLAN
Mirrore
d Port
Ref
Port
Src
RVLAN
Dst
RVLAN
Type IP ACL MAC ACL
1 Enable 1/0/8 1/0/10 Rx,Tx
2 Disable 6 0/4 10 4
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 408