Reference Guide

Format no macfilter addsrc macaddr vlanid
Mode Interface Config
macfilter addsrc all
This command adds all interfaces to the source filter set for the MAC filter with the MAC address of
macaddr and vlanid. You must specify the macaddr parameter as a 6-byte hexadecimal number in the
format of b1:b2:b3:b4:b5:b6. The vlanid parameter must identify a valid VLAN.
Format macfilter addsrc all macaddr vlanid
Mode Global Config
no macfilter addsrc all
This command removes all interfaces to the source filter set for the MAC filter with the MAC address of
macaddr and VLAN of vlanid. You must specify the macaddr parameter as a 6-byte hexadecimal
number in the format of b1:b2:b3:b4:b5:b6.
The vlanid parameter must identify a valid VLAN.
Format
no macfilter addsrc all macaddr vlanid
Mode Global Config
show mac-address-table static
This command displays the Static MAC Filtering information for all Static MAC Filters. If you specify all,
all the Static MAC Filters in the system are displayed. If you supply a value for macaddr, you must also
enter a value for vlanid, and the system displays Static MAC Filter information only for that MAC address
and VLAN.
Format
show mac-address-table static {macaddr vlanid | all}
Mode Privileged EXEC
Column Meaning
MAC Address The MAC Address of the static MAC filter entry.
VLAN ID The VLAN ID of the static MAC filter entry.
Source Port(s) The source port filter set's slot and port(s).
Note
Only multicast address filters will have destination port lists.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 414