Reference Guide

Format show dhcp l2relay circuit-id vlan vlan-list
Mode Privileged EXEC
Parameter Description
vlan-list
Enter VLAN IDs in the range 1–4093. Use a dash (–) to specify a range or a comma (,) to
separate VLAN IDs in a list. Spaces and zeros are not permitted.
show dhcp l2relay interface
This command displays DHCP L2 relay configuration specific to interfaces.
Format show dhcp l2relay interface {all | interface-num}
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220) (Switching) #show dhcp l2relay interface all
DHCP L2 Relay is Enabled.
Interface L2RelayMode TrustMode
---------- ----------- --------------
0/2 Enabled untrusted
0/4 Disabled trusted
show dhcp l2relay remote-id vlan
This command displays DHCP Remote-id vlan configuration.
Format
show dhcp l2relay remote-id vlan vlan-list
Mode Privileged EXEC
Parameter Description
vlan-list
Enter VLAN IDs in the range 1–4093. Use a dash (–) to specify a range or a comma (,) to
separate VLAN IDs in a list. Spaces and zeros are not permitted.
show dhcp l2relay stats interface
This command displays statistics specific to DHCP L2 Relay configured interface.
Format
show dhcp l2relay stats interface {all | interface-num}
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220) (Switching) #show dhcp l2relay stats interface all
DHCP L2 Relay is Enabled.
Interface UntrustedServer UntrustedClient TrustedServer TrustedClient
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 419