Reference Guide

MsgsWithOpt82 MsgsWithOpt82 MsgsWithoutOpt82
MsgsWithoutOpt82
--------- --------------- ----------------- ----------------- --------------
0/1 0 0 0 0
0/2 0 0 3 7
0/3 0 0 0 0
0/4 0 12 0 0
0/5 0 0 0 0
0/6 3 0 0 0
0/7 0 0 0 0
0/8 0 0 0 0
0/9 0 0
0 0
show dhcp l2relay agent-option vlan
This command displays the DHCP L2 Relay Option-82 configuration specific to VLAN.
Format show dhcp l2relay agent-option vlan vlan-range
Mode Privileged EXEC
The following example shows CLI display output for the command.
(Extreme 220) (Switching) #show dhcp l2relay agent-option vlan 5-10
DHCP L2 Relay is Enabled.
VLAN Id L2 Relay CircuitId RemoteId
--------- ---------- ----------- ------------
5 Enabled Enabled --NULL--
6 Enabled Enabled extreme
7 Enabled Disabled --NULL--
8 Enabled Disabled --NULL--
9 Enabled Disabled --NULL--
10 Enabled Disabled --NULL--
show dhcp l2relay vlan
This command displays DHCP vlan configuration.
Format
show dhcp l2relay vlan vlan-list
Mode Privileged EXEC
Parameter Description
vlan-list
Enter VLAN IDs in the range 1–4093. Use a dash (–) to specify a range or a comma (,) to
separate VLAN IDs in a list. Spaces and zeros are not permitted.
clear dhcp l2relay statistics interface
Use this command to reset the DHCP L2 relay counters to zero. Specify the port with the counters to
clear, or use the all keyword to clear the counters on all ports.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 420