Reference Guide

Format clear dhcp l2relay statistics interface {unit/slot/port |
all}
Mode Privileged EXEC
DHCP Client Commands
200 Series can include vendor and configuration information in DHCP client requests relayed to a DHCP
server. This information is included in DHCP Option 60, Vendor Class Identifier. The information is a
string of 128 octets.
dhcp client vendor-id-option
This command enables the inclusion of DHCP Option-60, Vendor Class Identifier included in the
requests transmitted to the DHCP server by the DHCP client operating in the 200 Series switch.
Note
This feature is available for 220 switches only.
Format dhcp client vendor-id-option string
Mode Global Config
no dhcp client vendor-id-option
This command disables the inclusion of DHCP Option-60, Vendor Class Identifier included in the
requests transmitted to the DHCP server by the DHCP client operating in the 200 Series switch.
Format
no dhcp client vendor-id-option
Mode Global Config
dhcp client vendor-id-option-string
This parameter sets the DHCP Vendor Option-60 string to be included in the requests transmitted to
the DHCP server by the DHCP client operating in the 200 Series switch.
Note
This feature is available for 220 switches only.
Format dhcp client vendor-id-option-string string
Mode Global Config
no dhcp client vendor-id-option-string
This parameter clears the DHCP Vendor Option-60 string.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 421