Reference Guide

Format clear ip dhcp snooping binding [interface unit/slot/port]
Mode
•
Privileged EXEC
•
User EXEC
clear ip dhcp snooping statistics
Use this command to clear all DHCP
Snooping statistics.
Format clear ip dhcp snooping statistics
Mode
•
Privileged EXEC
•
User EXEC
show ip verify source
Use this command to display the IPSG configurations on all ports.
Format show ip verify source
Mode
•
Privileged EXEC
•
User EXEC
Column Meaning
Interface Interface address in unit/slot/port format.
Filter Type Is one of two values:
•
ip-mac: User has configured MAC address filtering on this interface.
•
ip: Only IP address filtering on this interface.
IP Address IP address of the interface
MAC Address If MAC address filtering is not configured on the interface, the MAC Address field is empty. If port
security is disabled on the interface, then the MAC Address field displays “permit-all.”
VLAN The VLAN for the binding rule.
The following example shows CLI display output for the command.
(Extreme 220) #show ip verify source
Interface Filter Type IP Address MAC Address Vlan
--------- ----------- --------------- ----------------- -----
0/1 ip-mac 210.1.1.3 00:02:B3:06:60:80 10
0/1 ip-mac 210.1.1.4 00:0F:FE:00:13:04 10
show ip verify interface
Use this command to display the IPSG filter type for a specific interface.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 430