Reference Guide

Format show ip verify interface unit/slot/port
Mode
•
Privileged EXEC
•
User EXEC
Column Meaning
Interface Interface address in unit/slot/port format.
Filter Type Is one of two values:
•
ip-mac: User has configured MAC address filtering on this interface.
•
ip: Only IP address filtering on this interface.
show ip source binding
Use this command to display the IPSG bindings.
Format show ip source binding [{dhcp-snooping|static}] [interface
unit/slot/port] [vlan id]
Mode
•
Privileged EXEC
•
User EXEC
Column Meaning
MAC Address The MAC address for the entry that is added.
IP Address The IP address of the entry that is added.
Type Entry type; statically configured from CLI or dynamically learned from DHCP Snooping.
VLAN VLAN for the entry.
Interface IP address of the interface in unit/slot/port format.
The following example shows CLI display output for the command.
(Extreme 220) #show ip source binding
MAC Address IP Address Type Vlan Interface
----------------- --------------- ------------- ----- -------------
00:00:00:00:00:08 1.2.3.4 dhcp-snooping 2 1/0/1
00:00:00:00:00:09 1.2.3.4 dhcp-snooping 3 1/0/1
00:00:00:00:00:0A 1.2.3.4 dhcp-snooping 4 1/0/1
IGMP Snooping Configuration Commands
This section describes the commands used to configure IGMP snooping. 200 Series software supports
IGMP Versions 1, 2, and 3. The IGMP snooping feature can help conserve bandwidth because it allows
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 431