Reference Guide

line
This command gives you access to the Line Console mode, which allows you to configure various Telnet
settings and the console port, as well as to configure console login/enable authentication.
Format line {console | telnet | ssh}
Mode Global Config
Column Meaning
console Console terminal line.
telnet Virtual terminal for remote console access (Telnet).
ssh Virtual terminal for secured remote console access (SSH).
The following shows an example of this command.
(Extreme 220) (Config)#line telnet
(Extreme 220)(config-telnet)#
serial baudrate
This command specifies the communication rate of the terminal interface. The supported rates are 1200,
2400, 4800, 9600, 19200, 38400, 57600, 115200.
Default
9600
Format serial baudrate {1200 | 2400 | 4800 | 9600 | 19200 | 38400 |
57600 | 115200}
Mode Line Config
no serial baudrate
This command sets the communication rate of the terminal interface.
Format
no serial baudrate
Mode Line Config
serial timeout
This command specifies the maximum connect time (in minutes) without console activity. A value of 0
indicates that a console can be connected indefinitely. The time range is 0 to 160.
Default
5
Format serial timeout 0-160
Mode Line Config
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 44