Reference Guide

show mldsnooping
Use this command to display MLD Snooping information. Configured information is displayed whether
MLD Snooping is enabled.
Format show mldsnooping [unit/slot/port | vlanid]
Mode Privileged EXEC
When the optional arguments unit/slot/port or vlanid are not used, the command displays the following
information.
Term Definition
Admin Mode
Whether MLD Snooping is active on the switch.
Interfaces Enabled for MLD Snooping
Interfaces on which MLD Snooping is enabled.
MLD Control Frame Count
Displays the number of MLD Control frames that are processed by
the CPU.
VLANs Enabled for MLD Snooping
VLANs on which MLD Snooping is enabled.
When you specify the unit/slot/port values, the following information displays.
Term
Definition
MLD Snooping Admin
Mode
Whether MLD Snooping is active on the interface.
Fast Leave Mode
Whether MLD Snooping Fast Leave is active on the VLAN.
Group Membership
Interval
Shows the amount of time in seconds that a switch will wait for a report from a
particular group on a particular interface, which is participating in the VLAN,
before deleting the interface from the entry. This value may be configured.
Max Response Time
Displays the amount of time the switch waits after it sends a query on an
interface, participating in the VLAN, because it did not receive a report for a
particular group on that interface. This value may be configured.
Multicast Router
Present Expiration
Time
Displays the amount of time to wait before removing an interface that is
participating in the VLAN from the list of interfaces with multicast routers
attached. The interface is removed if a query is not received. This value may be
configured.
When you specify a value for vlanid, the following information appears.
Term
Definition
VLAN Admin Mode
Whether MLD Snooping is active on the VLAN.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 448