Reference Guide

no set mld querier election participate
Use this command to set the snooping querier not to participate in querier election but go into a non-
querier mode as soon as it discovers the presence of another querier in the same VLAN.
Format no set mld querier election participate
Mode VLAN Config
show mldsnooping querier
Use this command to display MLD Snooping Querier information. Configured information is displayed
whether MLD Snooping Querier is enabled.
Format show mldsnooping querier [{detail | vlan vlanid}]
Mode Privileged EXEC
When the optional arguments vlandid are not used, the command displays the following information.
Field Description
Admin Mode Whether MLD Snooping Querier is active on the switch.
Admin Version The version of MLD that will be used while sending out the queries. This is defaulted to MLD
v1 and it cannot be changed.
Querier Address Shows the IP address which will be used in the IPv6 header while sending out MLD queries. It
can be configured using the appropriate command.
Query Interval Shows the amount of time in seconds that a Snooping Querier waits before sending out the
periodic general query.
Querier Timeout Displays the amount of time to wait in the Non-Querier operational state before moving to a
Querier state.
When you specify a value for vlanid, the following information appears.
Field
Description
VLAN Admin
Mode
Whether MLD Snooping Querier is active on the VLAN.
VLAN Operational
State
Whether MLD Snooping Querier is in “Querier” or “Non-Querier” state. When the switch
is in Querier state, it will send out periodic general queries. When in Non-Querier state, it
will wait for moving to Querier state and does not send out any queries.
VLAN Operational
Max Response
Time
The time to wait before removing a Leave from a host upon receiving a Leave request. This
value is calculated dynamically from the Queries received from the network. If the Snooping
Switch is in Querier state, then it is equal to the configured value.
Querier Election
Participate
Whether the MLD Snooping Querier participates in querier election if it discovers the presence
of a querier in the VLAN.
Querier VLAN
Address
The IP address will be used in the IPv6 header while sending out MLD queries on this VLAN. It
can be configured using the appropriate command.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 453