Reference Guide

show lldp interface
Use this command to display a summary of the current LLDP configuration for a specific interface or for
all interfaces.
Format show lldp interface {unit/slot/port | all}
Mode Privileged EXEC
Column Meaning
Interface The interface in a unit/slot/port format.
Link Shows whether the link is up or down.
Transmit Shows whether the interface transmits LLDPDUs.
Receive Shows whether the interface receives LLDPDUs.
Notify Shows whether the interface sends remote data change notifications.
TLVs Shows whether the interface sends optional TLVs in the LLDPDUs. The TLV codes can be 0 (Port
Description), 1 (System Name), 2 (System Description), or 3 (System Capability).
Mgmt Shows whether the interface transmits system management address information in the LLDPDUs.
show lldp statistics
Use this command to display the current LLDP
trac and remote table statistics for a specific interface
or for all interfaces.
Format
show lldp statistics {unit/slot/port | all}
Mode Privileged EXEC
Column Meaning
Last Update The amount of time since the last update to the remote table in days, hours, minutes, and seconds.
Total Inserts Total number of inserts to the remote data table.
Total Deletes Total number of deletes from the remote data table.
Total Drops Total number of times the complete remote data received was not inserted due to insucient
resources.
Total Ageouts Total number of times a complete remote data entry was deleted because the Time to Live interval
expired.
The table contains the following column headings:
Column
Meaning
Interface The interface in unit/slot/port format.
TX Total Total number of LLDP packets transmitted on the port.
RX Total Total number of LLDP packets received on the port.
Discards Total number of LLDP frames discarded on the port for any reason.
Errors The number of invalid LLDP frames received on the port.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 464