Reference Guide

Column Meaning
Ageouts Total number of times a complete remote data entry was deleted for the port because the Time
to Live interval expired.
TVL Discards The number of TLVs discarded.
TVL Unknowns Total number of LLDP TLVs received on the port where the type value is in the reserved range,
and not recognized.
TLV MED The total number of LLDP-MED TLVs received on the interface.
TLV 802.1 The total number of LLDP TLVs received on the interface which are of type 802.1.
TLV 802.3 The total number of LLDP TLVs received on the interface which are of type 802.3.
show lldp remote-device
Use this command to display summary information about remote devices that transmit current LLDP
data to the system. You can show information about LLDP remote data received on all ports or on a
specific port.
Format show lldp remote-device {unit/slot/port | all}
Mode Privileged EXEC
Column Meaning
Local Interface The interface that received the LLDPDU from the remote device.
RemID An internal identifier to the switch to mark each remote device to the system.
Chassis ID The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC address of
the device.
Port ID The port number that transmitted the LLDPDU.
System Name The system name of the remote device.
The following example shows CLI display output for the command.
(Extreme 220) #show lldp remote-device all
LLDP Remote Device Summary
Local
Interface RemID Chassis ID Port ID System Name
------- ------- -------------------- ------------------ ------------------
0/1
0/2
0/3
0/4
0/5
0/6
0/7 2 00:FC:E3:90:01:0F 00:FC:E3:90:01:11
0/7 3 00:FC:E3:90:01:0F 00:FC:E3:90:01:12
0/7 4 00:FC:E3:90:01:0F 00:FC:E3:90:01:13
0/7 5 00:FC:E3:90:01:0F 00:FC:E3:90:01:14
0/7 1 00:FC:E3:90:01:0F 00:FC:E3:90:03:11
0/7 6 00:FC:E3:90:01:0F 00:FC:E3:90:04:11
0/8
0/9
0/10
0/11
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 465