Reference Guide

lldp med
Use this command to enable MED on an interface or a range of interfaces. By enabling MED, you will be
eectively enabling the transmit and receive function of LLDP.
Default Disabled
Format lldp med
Mode Interface Config
no lldp med
Use this command to disable MED.
Format no lldp med
Mode Interface Config
lldp med confignotification
Use this command to configure an interface or a range of interfaces to send the topology change
notification.
Default
Disabled
Format lldp med confignotification
Mode Interface Config
no ldp med confignotification
Use this command to disable notifications.
Format
no lldp med confignotification
Mode Interface Config
lldp med transmit-tlv
Use this command to specify which optional Type Length Values (TLVs) in the LLDP MED set will be
transmitted in the Link Layer Discovery Protocol Data Units (LLDPDUs) from this interface or a range of
interfaces.
Default
By default, the capabilities and network policy TLVs are included.
Format lldp med transmit-tlv [capabilities] [ex-pd] [ex-pse]
[inventory] [location] [network-policy]
Mode Interface Config
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 468