Reference Guide

(Extreme 220) (Routing) #show lldp med local-device detail 1/0/8
LLDP MED Local Device Detail
Interface: 1/0/8
Network Policies
Media Policy Application Type : voice
Vlan ID: 10
Priority: 5
DSCP: 1
Unknown: False
Tagged: True
Media Policy Application Type : streamingvideo
Vlan ID: 20
Priority: 1
DSCP: 2
Unknown: False
Tagged: True
Inventory
Hardware Rev: xxx xxx xxx
Firmware Rev: xxx xxx xxx
Software Rev: xxx xxx xxx
Serial Num: xxx xxx xxx
Mfg Name: xxx xxx xxx
Model Name: xxx xxx xxx
Asset ID: xxx xxx xxx
Location
Subtype: elin
Info: xxx xxx xxx
Extended POE
Device Type: pseDevice
Extended POE PSE
Available: 0.3 Watts
Source: primary
Priority: critical
Extended POE PD
Required: 0.2 Watts
Source: local
Priority: low
show lldp med remote-device
Use this command to display the summary information about remote devices that transmit current
LLDP MED data to the system. You can show information about LLDP MED remote data received on all
valid LLDP interfaces or on a specific physical interface.
Format
show lldp med remote-device {unit/slot/port | all}
Mode Privileged EXEC
Column Meaning
Local Interface The interface that received the LLDPDU from the remote device.
Remote ID An internal identifier to the switch to mark each remote device to the system.
Device Class Device classification of the remote device.
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show lldp med remote-device all
LLDP MED Remote Device Summary
Local
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 472