Reference Guide

Term Definition
Interface
The unit/slot/port of the specified interface.
Mode
ISDP mode enabled/disabled status for the interface(s).
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show isdp interface 0/1
Interface Mode
--------------- ----------
0/1 Enabled
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show isdp interface all
Interface Mode
--------------- ----------
0/1 Enabled
0/2 Enabled
0/3 Enabled
0/4 Enabled
0/5 Enabled
0/6 Enabled
0/7 Enabled
0/8 Enabled
show isdp entry
This command displays ISDP entries. If the device id is specified, then only entries for that device are
shown.
Format
show isdp entry {all | deviceid}
Mode Privileged EXEC
Term Definition
Device ID
The device ID associated with the neighbor which advertised the information.
IP Addresses
The IP address(es) associated with the neighbor.
Capability
ISDP Functional Capabilities advertised by the neighbor.
Platform
The hardware platform advertised by the neighbor.
Interface
The interface (unit/slot/port) on which the neighbor's advertisement was
received.
Port ID
The port ID of the interface from which the neighbor sent the advertisement.
Hold Time
The hold time advertised by the neighbor.
Version
The software version that the neighbor is running.
Switching Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 489