Reference Guide

Column Meaning
Cache Size The maximum number of entries in the ARP table. This value is configurable.
Dynamic Renew Mode Displays whether the ARP component automatically attempts to renew dynamic ARP
entries when they age out.
Total Entry Count
Current / Peak
The total entries in the ARP table and the peak entry count in the ARP table.
Static Entry Count
Current / Max
The static entry count in the ARP table and maximum static entry count in the ARP
table.
show arp switch
This command displays the contents of the switch’s Address Resolution Protocol (ARP) table.
Format show arp switch
Mode Privileged EXEC
Column Meaning
IP Address The IP address of a device on a subnet attached to the switch.
MAC Address The hardware MAC address of that device.
Interface The routing unit/slot/port associated with the device’s ARP entry.
IP Routing Commands
This section describes the commands used to enable and configure IP routing on the switch.
routing
This command enables IPv4 and IPv6 routing for an interface or range of interfaces. You can view the
current value for this function with the show ip brief command. The value is labeled as “Routing Mode.”
Default
disabled
Format routing
Mode Interface Config
no routing
This command disables routing for an interface.
You can view the current value for this function with the show ip brief command. The value is labeled as
“Routing Mode.”
Format
no routing
Mode Interface Config
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 505