Reference Guide

Term Definition
Interface
Valid slot and port number separated by a forward slash.
State
Routing operational state of the interface.
IP Address
The IP address of the routing interface in 32-bit dotted decimal format.
IP Mask
The IP mask of the routing interface in 32-bit dotted decimal format.
Method
Indicates how each IP address was assigned. The field contains one of the following values:
•
DHCP - The address is leased from a DHCP server.
•
Manual - The address is manually configured.
The following example shows CLI display output for the command.
(alpha1) #show ip interface brief
Interface State IP Address IP Mask Method
---------- ----- --------------- --------------- --------
1/0/17 Up 192.168.75.1 255.255.255.0 DHCP
show ip load-sharing
This command displays the currently configured IP ECMP
load balancing mode.
Format
show ip load-sharing
Mode Privileged Exec
The following example shows CLI display output for the command.
(Extreme 220) (Routing) #show ip load-sharing
ip load-sharing 6 inner
show ip protocols
This command lists a summary of the configuration and status for each unicast routing protocol. The
command lists routing protocols which are configured and enabled. If a protocol is selected on the
command line, the display will be limited to that protocol. If no virtual router is specified, the
configuration and status for the default router are displayed.
Format
show ip protocols [bgp|ospf|rip]
Mode Privileged EXEC
Parameter Description
BGP Section:
Routing
Protocol
BGP.
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 518