Reference Guide

The following example shows CLI display output for the command.
(Router) #show ip protocols
Routing Protocol.......................... BGP
Router ID................................. 6.6.6.6
Local AS Number........................... 65001
BGP Admin Mode............................ Enable
Maximum Paths............................. Internal 32, External 32
Always compare MED ....................... FALSE
Maximum AS Path Length ................... 75
Fast Internal Failover ........................ Enable
Fast External Failover ........................ Enable
Distance.................................. Ext 20 Int 200 Local 200
Address Wildcard Distance Pfx List
------- -------- -------- --------
172.20.0.0 0.0.255.255 40 None
172.21.0.0 0.0.255.255 45 1
Prefix List In............................ PfxList1
Prefix List Out........................... None
Redistributing:
Source Metric Dist List Route Map
--------- ---------- ----------------------- ---------------------------
connected connected_list
static 32120 static_routemap
rip 30000 rip_routemap
ospf ospf_map
ospf match: int ext1 nssa-ext2
Networks Originated:
10.1.1.0 255.255.255.0 (active)
20.1.1.0 255.255.255.0
Neighbors:
172.20.1.100
Filter List In........................ 1
Filter List Out....................... 2
Prefix List In........................ PfxList2
Prefix List Out....................... PfxList3
Route Map In.......................... rmapUp
Route Map Out......................... rmapDown
172.20.5.1
Prefix List Out....................... PfxList12
Routing Protocol.......................... OSPFv2
Router ID................................. 6.6.6.6
OSPF Admin Mode........................... Enable
Maximum Paths............................. 32
Routing for Networks...................... 172.24.0.0 0.0.255.255 area 0
10.0.0.0 0.255.255.255 area 1
192.168.75.0 0.0.0.255 area 2
Distance.................................. Intra 110 Inter 110 Ext 110
Default Route Advertise................... Disabled
Always.................................... FALSE
Metric.................................... Not configured
Metric Type............................... External Type 2
Redist
Source Metric Metric Type Subnets Dist List
--------- ------- ----------- ------- ---------
static default 2 Yes None
connected 10 2 Yes 1
Number of Active Areas.................... 3 (3 normal, 0 stub, 0 nssa)
ABR Status................................ Yes
ASBR Status............................... Yes
Routing Protocol.......................... RIP
RIP Admin Mode............................ Enable
Split Horizon Mode........................ Simple
Default Metric............................ Not configured
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 521