Reference Guide

Term Definition
Internal
The number of internal BGP routes.
Local
The number of local BGP routes.
OSPF Routes
Total number of routes installed by OSPF protocol.
Intra Area Routes
Total number of Intra Area routes installed by OSPF protocol.
Inter Area Routes
Total number of Inter Area routes installed by OSPF protocol.
External Type-1 Routes
Total number of External Type-1 routes installed by OSPF protocol.
External Type-2
Routes
Total number of External Type-2 routes installed by OSPF protocol.
Reject Routes
Total number of reject routes installed by all protocols.
Net Prototype Routes
The number of net-prototype routes.
Total Routes
Total number of routes in the routing table.
Best Routes (High)
The number of best routes currently in the routing table. This number only
counts the best route to each destination. The value in parentheses indicates the
highest count of unique best routes since counters were last cleared.
Alternate Routes
The number of alternate routes currently in the routing table. An alternate route
is a route that was not selected as the best route to its destination.
Route Adds
The number of routes that have been added to the routing table.
Route Modifies
The number of routes that have been changed after they were initially added to
the routing table.
Route Deletes
The number of routes that have been deleted from the routing table.
Unresolved Route
Adds
The number of route adds that failed because none of the route’s next hops were
on a local subnet. Note that static routes can fail to be added to the routing table
at startup because the routing interfaces are not yet up. This counter gets
incremented in this case. The static routes are added to the routing table when
the routing interfaces come up.
Invalid Route Adds
The number of routes that failed to be added to the routing table because the
route was invalid. A log message is written for each of these failures.
Failed Route Adds
The number of routes that failed to be added to the routing table because of a
resource limitation in the routing table.
Hardware Failed Route
Adds
The number of routes failed be inserted into the hardware due to hash error or a
table full condition.
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 527