Reference Guide

remove the exact-match option.) The command no match community removes the match term and all
its community lists.
Format no match community community-list [community-list...] [exact-
match]
Mode Route Map Configuration
match ip address
To configure a route map to match based on a destination prefix, use the match ip address command in
Route Map Configuration mode. If you specify multiple prefix lists in one statement, then a match
occurs if a prefix matches any one of the prefix lists. If you configure a match ip address statement
within a route map section that already has a match ip address statement, the new prefix lists are added
to the existing set of prefix lists, and a match occurs if any prefix list in the combined set matches the
prefix.
Default No match criteria are defined by default.
Format match ip address prefix-list prefix-list-name [prefix-list-
name...]
Mode Route Map Configuration
Parameter Description
prefix-list-
name
The name of a prefix list used to identify the set of matching routes. Up to eight prefix lists
may be specified.
no match ip address
To delete a match statement from a route map, use the no form of this command.
Format
no match ip address [prefix-list prefix-list-name [prefix-
list-name...]]
Mode Route Map Configuration
match ip address access-list-number | access-list-name
Use this command to configure a route map in order to match based on the match criteria configured in
an IP access-list. Note that an IP ACL (Access Control List) must be configured before it is linked to a
route-map. Actions present in an IP ACL configuration are applied with other actions involved in route-
map. If an IP ACL referenced by a route-map is removed or rules are added or deleted from that ACL,
the configuration is rejected.
If there are a list of IP access-lists specified in this command and the packet matches at least one of
these access-list match criteria, the corresponding set of actions in route-map are applied to packet.
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 537