Reference Guide

crypto key generate dsa
Use this command to generate a DSA key pair for SSH. The new key files will overwrite any existing
generated or downloaded DSA key files.
Format crypto key generate dsa
Mode Global Config
no crypto key generate dsa
Use this command to delete the DSA key files from the device.
Format no crypto key generate dsa
Mode Global Config
Hypertext Transfer Protocol Commands
This section describes the commands used to configure HTTP and secure HTTP access to the switch.
Access to the switch by using a web browser is enabled by default. Everything you can view and
configure by using the CLI is also available by using the web.
ip http accounting exec, ip https accounting exec
This command applies user exec (start-stop/stop-only) accounting list to the line methods HTTP and
HTTPS.
The user exec accounting list should be created using the aaa accounting command (see aaa
accounting on page 87).
Format
ip {http|https} accounting exec {default|listname}
Mode Global Config
Parameter Description
http/https The line method for which the list needs to be applied.
default The default list of methods for authorization services.
listname An alphanumeric character string used to name the list of accounting methods.
no ip http/https accounting exec
This command deletes the authorization method list.
Format
no ip {http|https} accounting exec {default|listname}
Mode Global Config
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 54