Reference Guide

Format no set local-preference value
Mode Route Map Configuration
set metric (BGP)
To set the metric of a route, use the set metric command in Route Map Configuration mode. This
command sets the Multi Exit Discriminator (MED) when used in a BGP context. When there are multiple
peering points between two autonomous systems (AS), setting the MED on routes advertised by one
router can influence the other AS to send trac through a specific peer.
Format set metric value
Mode Route Map Configuration
Parameter Description
value
A metric value, from 0 to 4,294,967,295 (any 32-bit integer).
no set metric (BGP)
To remove a set command from a route map, use the no form of this command.
Format
no set metric value
Mode Route Map Configuration
show ip policy
This command lists the route map associated with each interface.
Format
show ip policy
Mode Privileged EXEC
Column Meaning
Interface The interface.
Route-map The route map
show ip prefix-list
This command displays configuration and status for a prefix list.
Format
show ip prefix-list [detail | summary] prefix-list-name
[network/length] [seq sequence-number] [longer] [first-match]
Mode Privileged EXEC
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 547