Reference Guide

Parameter Description
local Uses the local username database for authentication.
none Uses no authentication.
radius Uses the list of all RADIUS servers for authentication.
tacacs Uses the list of all TACACS+ servers for authentication.
The following example configures HTTPS authentication.
(Extreme 220) (Config) # ip https authentication radius local
no ip https authentication
Use this command to return to the default.
Format no ip https authentication
Mode Global Config
ip http server
This command enables access to the switch through the web interface. When access is enabled, users
can log in to the switch from the web interface. When access is disabled, users cannot log in to the
switch's web server. Disabling the web interface takes eect immediately. All interfaces are aected.
Default
Enabled
Format ip http server
Mode Privileged EXEC
no ip http server
This command disables user access to the switch through the web interface.
Format
no ip http server
Mode Privileged EXEC
ip http secure-server
This command enables the secure socket layer for secure HTTP.
Default
Disabled
Format ip http secure-server
Mode Privileged EXEC
Management Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 56