Reference Guide

no ip rip send version
This command configures the interface to allow RIP control packets of the default version to be sent.
Format no ip rip send version
Mode Interface Config
hostroutesaccept
This command enables the RIP hostroutesaccept mode.
Default enabled
Format hostroutesaccept
Mode Router RIP Config
no hostroutesaccept
This command disables the RIP hostroutesaccept mode.
Format no hostroutesaccept
Mode Router RIP Config
split-horizon
This command sets the RIP split horizon mode. Split horizon is a technique for avoiding problems
caused by including routes in updates sent to the router from which the route was originally learned.
The options are: None - no special processing for this case. Simple - a route will not be included in
updates sent to the router from which it was learned. Poisoned reverse - a route will be included in
updates sent to the router from which it was learned, but the metric will be set to infinity.
Default
simple
Format split-horizon {none | simple | poison}
Mode Router RIP Config
no split-horizon
This command sets the default RIP split horizon mode.
Format
no split-horizon
Mode Router RIP Config
Routing Commands
ExtremeSwitching 200 Series: Command Reference Guide for version 01 .02.04.0007 569